DIY carport kits for Western Australia
Custom-made single and double carport kits in Colorbond steel, engineered for your site and cut to your sizes. Choose a flat or gable roof, freestanding or attached to the house, type in any size you need, and see your price as you design. Engineering and permit drawings are included with every carport kit.
Design your own, or start from an example
There are no set sizes. Every carport kit is made to the measurements you type in, down to the millimetre.
Design from scratch
Open the designer, pick a roof style and enter your own width, length and height. Choose your roof sheets, colours and options and watch your carport build in 3D.
Open the designerStart from an example
Pick one of the example carports below. It opens in the designer ready to go, then you change the sizes, roof, colours and options to suit your site.
See the examplesPick a style
Flat or gable roof, single or double, attached or freestanding.
Any styleEnter your sizes
Type the exact width, length and height you need, then add colours, roof sheets and extras.
Cut to the mmSee your price
The final price updates as you design, including GST, engineering and permit drawings.
Final priceOrder your kit
Send your design as an order request and we'll be in touch to confirm it. Manufacture takes about 2 weeks.
About 2 weeksStart with an example, then make it yours
These are starting points, not set sizes. Pick the closest carport, then change the width, length, height, roof, colours and options to suit your cars, boat or caravan. The price updates as you go.
Single flat roof carport
- One car, trailer or small boat
- Freestanding or attached to the house
- Corrugated, Trimdek or Spanplus roof
Double flat roof carport
- Two cars side by side
- Clean, low-pitch roof
- Full Colorbond colour range
Single gable carport
- Extra height and a classic look
- 18° pitch with optional infill
- Suits caravans with a raised height
Double gable carport
- Two cars under a pitched roof
- Matches gable and hip homes
- Polycarbonate or Colorbond infill
OFF
Built for WA conditions
Engineered for your site
Posts, beams and footings sized for your wind and site class, with engineering and permit drawings included.
Built to last
Colorbond steel in your colours. E-prime frame finish available, and hot-dip galvanising for sites within 1 km of breaking surf.
Your sizes, your height
Type the width, length and height you need for cars, boats or caravans. Every part arrives cut to length.
Roof sheet options
Corrugated
The classic Colorbond profile. Full colour range, 5° pitch on flat roofs, skylights and full poly roofs available.
Trimdek
A bold, modern rib. Full colour range, down to 3° pitch on flat roofs, skylights and full poly roofs available.
Spanplus / Cdek
Long-span decking that suits low 1° roofs. Surfmist, Classic Cream, Paperbark and Alpine, plus two-tone Cdek.
Insulated panel
Corrugated or Trimdek top skin over insulation, with a Surfmist ceiling underneath. Cooler and quieter.
Colorbond colours
Colours on screen are a guide only. Check a real sample at your local Colorbond stockist before you order.
Example carport kit prices
| Kit | Example size | Price | With EOY28 | |
|---|---|---|---|---|
| Single flat roof carport | 3.0 x 6.0 m | $6,237 | $4,491 | Open in designer |
| Double flat roof carport | 6.0 x 6.0 m | $9,276 | $6,679 | Open in designer |
| Single gable carport | 3.5 x 6.0 m | $8,655 | $6,232 | Open in designer |
| Double gable carport | 6.0 x 6.0 m | $12,533 | $9,024 | Open in designer |
Prices include GST, engineering and permit drawings. N2 wind class, Corrugated Colorbond roof, standard frame, delivery extra.
Need a hand?
Talk to a builder, not a call centre. We build these patios and carports every week.